CPET, PP Coating & EVOH: Food Packaging Materials


Competition in disposable food packaging has shifted from the basic ‘can hold food, won’t leak soup’ to performance in heat resistance, freshness retention, shelf display appeal, and environmental compliance. Hot soup deliveries need heat and oil resistance, baked goods go into the oven, and fresh fruits and vegetables need oxygen barriers to stay fresh — a single paper material or ordinary PE coating can no longer meet these demands.

 

This article analyzes three materials with different roles: CPET serves as a thermoforming heat-resistant lining for paper products, PP coating provides heat resistance and leak-proofing for the paper surface, and EVOH handles oxygen barrier and freshness preservation. Beyond some basic properties, the article also covers structural principles, processing methods, suitable dishes, cost positioning, and common mistakes in selection, to serve as a reference for product development and procurement.

1. CPET (Crystallized PET Thermoformed Lining)

Definition and Forming Principle

CPET, short for Crystallized Polyethylene Terephthalate, is a high-temperature resistant sheet produced by crystallizing PET. In paper-based containers like paper lunch boxes or bowls, CPET sheets are heated and softened, then thermoformed into linings that adhere to the inner walls; the paper base provides shape and print quality, while the CPET lining directly contacts food and provides heat resistance. Its crystalline structure keeps the lining stable at high temperatures, preventing softening or collapse.

 

Material Properties

CPET linings handle a wide temperature range, withstanding around 200–220°C at high temperatures and down to about -40°C at low temperatures. They can go from freezer to oven directly and can also be microwaved; suitable for both refrigeration and freezing. The paper base and CPET lining are usually integrated and cannot be separated. CPET is a petroleum-based plastic, not compostable or biodegradable; recycling paper-plastic composites requires special sorting, and standard paper recycling streams are usually limited.

 

Suitable Dishes and Scenarios

Primarily for baking, it works with bread, pastries, cakes, puddings, and other baked goods that can go directly into the oven or be reheated; it also covers frozen semi-prepared foods, ready meals, airline meal trays, and packaging that follows a continuous workflow from freezer to oven to table.

 

Cost and Supply Chain Positioning

The combination of paper base + CPET lining is more expensive than ordinary PP-coated paper containers, mainly targeting channels with high temperature requirements like baking, airlines, and supermarket pre-made meals. It can be customized according to the size of paper boxes or bowls, compartments, and thermoforming methods.

 

2. PP Lamination (Polypropylene Coating)

Material Definition

PP lamination is a layer of food-grade polypropylene (PP) film applied to the inside of paper cups, bowls, and boxes. It’s one of the mainstream alternatives to traditional PE lamination, especially for disposable paper packaging that needs microwave reheating.

 

Structure and Forming Principle

On the production line, the paper is heat-pressed with the PP film, and after cooling, a paper-plastic integrated structure is formed. The melting point and heat resistance of the PP layer are higher than PE, so it’s less likely to soften or leak when holding hot soup, curry, or chili oil.

 

Material Properties

PP coating can withstand temperatures around 110–130°C, suitable for intermittent heating but not oven use, as high oven temperatures can deform and soften it. Microwave reheating is fine. It supports refrigeration, most products can be frozen short-term, while long-term freezer performance depends on the final structure and coating formula. The PP layer is tightly bonded to the paper and can’t be peeled off. PP lamination is petroleum-based plastic, not compostable, and not biodegradable.

Notes

Do not put it in the oven. Microwave use is limited to reheating and shouldn’t involve long-term high-power heating.

 

Cost and Supply Chain Positioning

PP lamination costs more than regular PE lamination, but less than CPET. The supply chain for paper bowls, cups, and meal boxes is mature. Compared to biodegradable coatings, PP has a better balance of heat resistance and cost, but is less environmentally friendly.

 

3. EVOH High Barrier Film (Ethylene-Vinyl Alcohol Copolymer)

Material Definition

EVOH is an ethylene-vinyl alcohol copolymer, a high-barrier resin. It's commonly used in modified atmosphere packaging, sandwiched as an oxygen-barrier layer between PE, PP, or PA layers, forming a multilayer co-extruded film or sheet.

 

Structure and Barrier Principle

The hydroxyl groups in EVOH's molecular chains provide strong oxygen barrier properties, significantly reducing oxygen permeability and slowing down fat oxidation and flavor loss. Since EVOH is sensitive to moisture, in practice it must be protected by layers like PE/PP on both sides to form a sealed structure, preventing water vapor from reducing its barrier performance. Even though the EVOH layer is usually only a few microns thick, it is the core of the entire packaging's freshness-preserving ability.

 

Material Properties

EVOH cannot be used as a heating container, and it is not suitable for ovens or microwaves, but it can be refrigerated. EVOH composite inner films can be adhered to container walls, and the inner lining can be peeled off by hand while keeping the container structure intact. EVOH is petroleum-based, so it is not compostable or biodegradable.

Suitable Foods and Scenarios

Mainly used for MAP trays, suitable for fresh meat and poultry, seafood, fruits and vegetables, cooked foods, and pre-prepared meals that need oxygen isolation to stay fresh. It can also be used as inner bags for beverages in boxes (coffee, juice, milk tea, alcohol), sauces, syrups, seasoning soft pouches, as well as long-term packaging for frozen meat and semi-finished products.

 

Cost and Supply Chain Positioning

EVOH is a functional material with a higher cost than regular PE. Its value lies mainly in extending shelf life, reducing fresh food loss, and supporting brand cold-chain packaging selling points.

 

4. Comparison of Three Materials

Item

CPET

PP Coating

EVOH Barrier Film

Core function

Oven and freezer baking

Intermittent reheating

Oxygen barrier and fresh-keeping

Process

Sheet thermoforming, fitted to paper base

Extrusion coating onto paper

Multilayer co-extruded film

Temperature range

About -40°C to 220°C

About 110–130°C, intermittent heating

N/A (depends on outer layer)

Oven-safe

Yes

No

No

Microwave-safe

Yes

Yes (reheating only)

As per finished-product label

Paper-film separation

No

No

Yes

Compostable

No

No

No

Biodegradable

No

No

No

Common applications

Paper meal boxes, paper bowls

Paper bowls, paper cups, paper boxes

Modified-atmosphere packaging (MAP)

 

5. Common Misconceptions

Misconception 1: PP coated paper bowls can go into the oven. PP has limited heat resistance, and high oven temperatures can easily deform it. It’s only suitable for microwave reheating.

Misconception 2: EVOH is an independent packaging material. It’s actually an oxygen barrier layer in a composite structure and must be sandwiched between protective layers.

Misconception 3: Labeling 'recyclable' means it’s actually recycled. CPET-lined paper containers, PP-coated paper, and EVOH composite films can get contaminated with oil and have multi-layer structures after use, so actual recycling depends on local sorting facilities.

Misconception 4: New materials are always more eco-friendly. CPET, PP, and EVOH are all petroleum-based and not biodegradable. Any eco-friendly claims require supporting biodegradable materials.

Misconception 5: The higher the heat resistance, the better for takeout. Material choice should match the food type: PP coating for hot soups to prevent leaks, EVOH for oxygen barrier and freshness, CPET lining for oven and freezer durability.

 

Conclusion

CPET lining, PP coating, and EVOH aren’t competing materials; they cover different needs: oven/freezer resistance, heat/leak resistance, and oxygen/freshness preservation. When choosing materials, first consider the type of dish, heating method, freshness period, and sales channel, then decide on the material combination. Once functionality is ensured, long-term planning can factor in cost, recycling options, and environmental certifications.



Service Hotline

+86 19159202052

Anhui SenAng Green Technology Co.,Ltd.

Add:No.9 Qinghe Road,Hefei City;AnHui Province;China

Email:senang@senangbz.com

Wechat&Whatsapp:+86 19159202052

Copyright ©2025 Anhui SenAng Green Technology Co.,Ltd.  |

business license
message

Submit Your Demand

محمّد‎ **** from the  (Saudi Arabia) Submit Demand 20 Minutes Ago

 

 

Bradely **** from the  (Unite Kingdom) Submit Demand 45 Minutes Ago

 

 

เจริญป้ต **** from the  (Thailand) Submit Demand 8 Minutes Ago

 

 

Omphile **** from the  (South Africa) Submit Demand 25 Minutes Ago

 

 

서준 **** from the  (South Korea) Submit Demand 1 Hour Ago

 

 

Jackson *** from the  (USA) Submit Demand 30 Minutes Ago

 

 

Tucker *** from the  (Brasil) Submit Demand 3 Hours Ago

 

 

Aurora *** from the  (Italy) Submit Demand 8 Hours Ago

message Get a Free Quote!

Thanks for your inquiry,

we will get back to you soon.

%{tishi_zhanwei}%